From DE400W Brushless DC Spindle Motor ER8+Driver 24-60VDC+55mm Clamp CNC Kit for CNC Router Engraving Milling Machine. 1 x 600W Brushless driver without hall 24-60VDC. 1 x 400W Brushless DC spindle without hall. This brushless driver is without hall. It can be used to engrave metal or non-metal and other materials.
1 High performance, low prices. 2 DSP main control module.3 No current passing when no movement. 6 Maximum driver power 600W. 7 3 debugging ways: Panel potentiometer, external voltage signal, external PWM Signal. 8 Maximum driver motor running speed 12000R/Min.
9 Speed testing port for user to inspect the real speed. 10 Internal over-voltage, over-current and stalling inspection. 11 Input signal TTL compatible. 3 Rotating speed: 12000 RPM/Min.
4 Torque: 0.45 N. 5 Insulation resistance: > 2ohms. 8 Chuck portion length: Arbor parts 35mm, (including the nut and sandwich 43mm). 9 Part chuck diameter: 16mm.
10 Total motor length: 172mm (comprising gripping parts and motor). 11 Spindle Weight: 1.1KG. 12 Spindle runout: about 0.01-0.03. 13 Mount: Product outline dimension is 1187633mm, as picture 1-7 shows. The two installing holes size is 110mm.NVBDL + without Hall feedback, other parts are same as NVBDH+. NVBDH+ and NVBDL+ connection table as table 2-1. The green color Hall signal cable is only for NVBDH+.
NVBDL+ is the driver without Hall feedback, so the connection is easier than NVBDH+. Here we also introduce 3 control modes.NVBDL+ panel button speed control+ Panel start/stop control. NVBDL+ panel button speed control+ Panel start/stop control connection pls see the picture. In this mode, if the control system need to collect motor speed data, then FG, GND port on NVBDH+ need to connect with signal collection port, GND port on controller. Please give us the opportunityto resolve any problem when you have, we concern your problem and we will try our best to resolve it. Item must be in it's original condition and no physical damage. When you have the parcel, and not satisfied the goods or it is other problem like as broken, pls tell us the detail reason and provide the photos. The item "From DE400W Brushless DC Spindle Motor ER8+Driver 24-60V DC+55mm Clamp CNC Kit" is in sale since Monday, August 17, 2020. This item is in the category "Equipamiento y maquinaria\Maquinaria industrial". The seller is "kuku218" and is located in Frankfurt. This item can be shipped to European Union member countries.